3 Way Splitter

5~1000 MHz

Non Power Passing / Signal Only

For Commercial or Residential use.

This three-way splitter is housed in a zinc diecast, corrosion resistant case.

Includes one grounding block screw and two mounting screws.

Use these Splitters for splitting TV Out Signals.

4 Way Splitter

5~1000 MHz

Non Power Passing / Signal Only

For Commercial or Residential use. This four-way splitter is housed in a zinc diecast, corrosion resistant case.

Includes one grounding block screw and two mounting screws.

Use these Splitters for splitting TV Out Signals.

2 Way Splitter

5~2050 MHz

Single Port Power Passing

For Commercial or Residential use.

This two-way splitter is corrosion resistant and housed in a zinc diecast, tongue & groove case.

Includes two grounding block screws and two mounting screws.

Use the Port Power Passive Splitters when you are splitting a Powered Incoming LNB Cable.
Let the Power Passive Port go to the Main receiver to power the LNB.
Use the Non Powered Passive ports to go to Slave Receivers.
This way the ouput Voltage from the Slave Receivers, will be blocked at the Splitter.

4 Way Splitter

5~2050 MHz

Single Port Power Passing

For Commercial or Residential use.

This four-way splitter is corrosion resistant and housed in a zinc diecast, tongue & groove case.

Includes two grounding block screws and two mounting screws.

Use the Port Power Passive Splitters when you are splitting a Powered Incoming LNB Cable.
Let the Power Passive Port go to the Main receiver to power the LNB.
Use the Non Powered Passive ports to go to Slave Receivers.
This way the ouput Voltage from the Slave Receivers, will be blocked at the Splitter.

8 Way Splitter

5~2050 MHz

Single Port Power Passing

For Commercial or Residential use.

This eight-way splitter is corrosion resistant and housed in a zinc diecast, tongue & groove case.

Includes two grounding block screws and two mounting screws.

Use the Port Power Passive Splitters when you are splitting a Powered Incoming LNB Cable.
Let the Power Passive Port go to the Main receiver to power the LNB.
Use the Non Powered Passive ports to go to Slave Receivers.
This way the ouput Voltage from the Slave Receivers, will be blocked at the Splitter.

2 Way Splitter

5~2050 MHz

All Ports Power Passing

For Commercial or Residential use.

This two-way splitter is corrosion resistant and housed in a zinc diecast, tongue & groove case.

Includes two grounding block screws and two mounting screws.

4 Way Splitter

5~2050 MHz

All Ports Power Passing

For Commercial or Residential use.

This four-way splitter is corrosion resistant and housed in a zinc diecast, tongue & groove case.

Includes two grounding block screws and two mounting screws.

Ricks Satellite
Sales, Service & Local Installation -- C / Ku / MPEG2 Satellite Systems / DSS Accessories
316 NE Summit Drive -- Blue Springs, Missouri 64014 USA -- 816-228-1801

Contact Ricks Satellite

Major Credit/Debit Cards Accepted
Money Orders and Checks accepted also.

Ricks Satellite cannot offer for Sale any Manufacturers Extended Warranties. They must be purchased directly from the Manufacturer.

PAY PAL Address is RickCaylor@aol.com
Most Orders Shipped Same Day! UPS Tracking numbers are also provided!

In Association with Gofastmotorsports.com